All the items listed on this page are authentic screen used. I will be adding new items weekly. Check out the forum.

1234567

STAR TREK VIII BORG ALCOVE MANNEQUIN A Borg alcove mannequin created for Star Trek VIII First Contact for use as fillers for background performers. The item is molded foam rubber with an internal PVC frame, painted black, metallic silver, and copper with other painted accents. The item features multiple multi-colored light bulbs that flash sequentially at the torso and around the neckline with varying degrees of functionality. The electronics are powered by a single rechargeable Makita name brand 9.6volt battery. The battery fits into a mounted position on the back with a Velcro attachment. The techno-arm on the right side is removable molded black rubber; a slit in the front of it may not be attributed to damage and could have production purpose. The paint around the back of the mannequin shows signs of deterioration. Generally a visible degree of flaking occurred leaving portions of the yellow foam rubber materiel apparent. The right foot of the mannequin is removed exposing the PVC framework inside and the left side foot is loose. The item measures approx. 69 X 29 X 12 inches and is for some reason without a head. Exposed internal construction material is visible where the neck would attach to the head.

STAR TREK VIII USS ENTERPRISE-E PAINTING DUPLICATE A color duplicate of an artistic medium that depicts the USS Enterprise-E in flight past several worlds. The Enterprise is turned slightly away from the viewer and features lines of travel off the nacelles. The copy of a metallic gold framing is present as well and the signature of John Eaves is incorporated into the piece along a planet's edge. The duplicate is adhered to a large sheet of black poster board and measures approx. 19 X 13 while the duplicate measures approx. 8.5 X 11 inches.

STAR TREK ENTERPRISE SHUTTLE BAY TETHER LAUNCHER FROM DIVERGENCE An impressive prop item featured in the Star Trek Enterprise episode Divergence during a daring ship to ship transfer of crew from the Columbia NX-02 to the Enterprise NX-01 at an incredible warp 5.2! The item is the tether launcher used by Lieutenant Reed to bring Commander Tucker on board. The item features a backlit targeting display screen with an internally applied graphic, two sets of multi-colored faux rubber buttons, metal positioning rails, a metal mount for hanging, and multiple Starfleet inventory applications in varying colors with an array of information printed on them. A depression switch activates the internal lighting to backlight the screen which is powered by a PS-1229 sized cell which is zip tied into the item yet retains power from production use. The item measures approx.14 X 21 X 12.5 inches.

STAR TREK ENTERPRISE XINDI REPTILIAN RIFLE Seen in Star Trek Enterprise, season 3 episodes like The Shipment, this Xindi rifle was used by a Reptilian Xindi one of five remaining Xindi species. Made of solid cast rubber, this prop Xindi Reptilian Rifle has been spray-painted with metallic purple paint for a finished look. A piece of white acrylic has been attached to the front as a pseudo phaser tip. This rifle also has lights that work on the top and a little ahead of the trigger guard area. Interesting to see a rubber rifle with lights that work. Measures approx. 22 x 5 x 5 1/2 inches.

STAR TREK DS9 ROMULAN DISRUPTOR RIFLE Romulan rifle which was used in Deep Space Nine. Excellent condition.

NEMESIS KOLARAN JEEP CANNON Featured in the ARGO scene of Star Trek X: Nemesis during with Captain Picard (Patrick Stewart), Data, and Worf comprised an away team to the planet Kolarus III. Investigating the possibility of another android like Data being present on the planet the away team was accosted by Kolaran natives, a reptilian alien whose limited technology lead them to drive surface vehicles like all terrain jeeps and buggies with top mounted energy weapons. This item is from one of those vehicles, a turret mounted prop gun made from multiple components of cast resin, metal, plastic, wood, mesh wiring, rope, and colored cloth. The item is painted to appear aged and dirt from the shooting location is still crammed within its crevices. The tip of the barrel is slightly bent. Measures approx. 40 X 12 X 6 inches.

STAR TREK ENTERPRISE BAJORAN ELECTRONIC DEVICE This is a Bajoran device and used on the Star Trek DS9 series. It is made of resin painted copper color with gold and black colored accents. A black button on the top activates a small blue strobe light on the front of the device, backlights a small gauge panel and activates five LED lights. Three lights are red, two are green. Two of the red lights flash intermittently. The device is powered by a single 9V battery that is accessed by removing the six Philips head screws and taking off the back panel. Measures approx. 6 x 3.5 x 2 inches. Was also used by Phlox in Divergence as a medical scanning tool.

*STAR TREK DS9 BAJORAN TEMPLE CONCEPT MODEL A concept model created for Star Trek Deep Space Nine. The item is made from white foam core with multiple photocopied pencil sketches printed or adhered to the face of the walls and flooring for depth and dimension. The item depicts a section of ruins with a single standing figure for scale. Due to time and storage conditions the item depicts a visible degree of damage in that one of the walls is separate but accompanying and two pillars share the same fate. The item features a staircase, a broken down wall, small entry ways, and stands on a thick base. The item measures approx. 16 X 19 X 10.5 inches.

STAR TREK DS9 CAMERA TEST MODEL BAJORAN ASSAULT SHIP A foam core test model created for Star Trek episodic television. The item is a Bajoran Assault Ship made from foam shaped core slats adhered and taped together. A hole in the keel of the underside remains from removal of a mounting pole. The item was created to use in camera tests prior to filming the actual special effects model shot. Measures approx. 9.25 X 12 X 2 inches.

STAR TREK TNG CAMERA TEST MODEL ROMULAN SCOUT SHIP A foam core test model created for Star Trek episodic television. The item is a Romulan Scout Ship made from two layers of thick foam core with struts placed between to separate them. The item is inscribed Romulan Scout 1/3 scale and depicts only a small degree of damage due to time and storage condition in the form of bending and creasing. The item was created to use in camera tests prior to filming the actual special effects model shot. Measures approx. 8.5 X 10.75 X 1 inch.

STAR TREK TNG CAMERA TEST MODEL VULCAN T'PAU TYPE SHIP A foam core test model created for Star Trek episodic television. The item is a Vulcan cruiser titled the T'Pau Type. It features card board warp nacelles configured in the traditional Vulcan fashion. The item is inscribed Scale to D.S.9. Vulcan Shuttle and depicts a degree of damage where adhesive has failed on one side of the nacelle and where a mounting bar has been removed. The item was created to use in camera tests prior to filming the actual special effects model shot. The item measures approx. 7 X 3 X 10 inches.

STAR TREK “FLOATING STARSHIP WRECKAGE MODEL A prop model similar to those featured throughout Star Trek episodic television. This item is a model of was believed to the wreckage of a Kazon starship; it is composed of foam core base around multiple layers of cardboard layers denoting the different levels of the ship, multicolored, plastic accents meant to be pieces of the outer and inner hulls, encased partially in black foil wrap. The item features electrical wiring suggesting lit up somehow and is attached via a wood brace, to a metal pole. The item measures approx. 40 X 10 X 10 inches.

STAR TREK SAURIAN BRANDY BOTTLE A prop Saurian brandy bottle like those appearing in the Star Trek Deep Space Nine episode Who Mourns for Morn. The item is a solid cast resin prop painted rust brown with a tan faux stopper and multiple lengths of tan leather adhered. The item is believed to have been fashioned from an original Dickel bottle and a degree of original inscription fades in and out around the base. The item measures approx. 14.25 X 4.25 inches diameter.

STAR TREK VOYAGER HIERARCHY PADD FROM TINEKER, TENOR, DOCTOR, SPY STAR TREK VOYAGER HIERARCHY PADD FROM TINEKER, TENOR, DOCTOR, SPY The item is a PADD featured in the Star Trek Voyager episodes Tinker, Tenor, Doctor, Spy for use by aliens working within The Hierarchy to communicate their mission requests to their superiors. The item is made from two layers of acrylic, one clear, and the other marmalade orange colored with black faux buttons and a clear, asymmetrical section in the middle that is silk screened on the inside with metallic gold colored circuitry. The item measures approx. 6.25 X 2.75 X 0.25 inches and is the only one ever to be located during this auction.

Grand Nagus Beetle Snuff Box Small gold box used by the Grand Nagus on Deep Space Nine. Was purchased from the 2006 Chrities auction. Used in DS9 episode Rules of Aquisition.

STAR TREK X NEMESIS ROMULAN SENATE STOOLS PAIR Two Romulan Senate stools used in the feature film Star Trek X Nemesis. Both are saddle shaped and painted metallic bronze with oval bases and woven seats fore comfort. Measuring approx. 26 X 33 inches.

STAR TREK DS9 ALIEN HEAD MASK FROM ARMAGGEDON GAME An alien head made for use on a background alien that was featured during the Star Trek Deep Space Nine series including the episode Armageddon Game. The detailed head is made of latex that is painted to give the appearance of flesh. The top of the head is furry to the touch and there are false teeth in the mouth. The mask is displayed on a wooden base. (Please note that the crew here at the Star Trek Auction are quite fond of this fellow who we named Lancaster so whoever wins him please take care of him) Measures approx. 11 x 11 x 15 inches

STAR TREK THE NEXT GENERATION 24th CENTURY ENTERPRISE-D TABLE A set dressing table featured in various episodes of Star Trek The Next Generation and of the style that would have been in either Counselor Troi's office, personal quarters, or Ten Forward. The item itself is an oval shaped table with a glossy tan top surface, pinkish velveteen upper base, for wheels attached to a lower base the same color as the top. This piece measures approx. 35 X 28 X 27.5 inches.

*STAR TREK VOYAGER OBSOLETE ALIEN IMPULSE ENGINE COMPONENT FROM RENAISSANCE MAN A metal hand prop featured in the Star Trek Voyager episode Renaissance Man for use by Nar, an alien who hoped to make his career out of repairing obsolete engine components. The item was later used to club his superior in the back of the head while he struggled with The Doctor. The item is made from silver colored metal with asymmetrical handles on both sides, and several light up features. The item lights in its central tube to shine purple and in the cap where it flashes several colored in sequence, both are activated by separate gold colored metal buttons. The purple light is powered by eight AA sized 1.5volt batteries and the flashing light at the top is powered three A23 sized 12.0volt batteries. The item also features a curved metal piece that is attached by magnets and is adorned by a Star Trek Enterprise era graphical application that has been damaged to the point of blurring by liquid. The item measures approx. 15.5 X 5 X 2.25 inches.

STAR TREK ENTERPRISE TANDARAN COMPUTER CONSOLE FROM DETAINED A prop item featured in the Star Trek Enterprise episode Detained wherein Captain Archer and Ensign Mayweather accidentally stray into a militarized zone, are taken into custody by a race called the Tandarans, and imprisoned along with a number of Suliban. This item is a Tandaran computer console that was sitting on Colonel Grat's desk in the prison where Archer and Mayweather were being held; it has a brown outer casing, silver colored lines of detail, a general rounded design featuring a piece of smoked acrylic with Tandaran script, several faux buttons, a metal colored, round accent that summons imagery of an aperture. Black textured detail leading to a large, clear, acrylic view screen with a graphical application of more Tandaran script upon it. The item measures approx. 12 X 14 X 12.5 inches.

*STAR TREK ENT ROMULAN TELEPRESENCE DEVICE FROM BABEL ONE AND THE AENAR A piece of set dressing featured in the Romulan Interference Aenar story arc of the fourth season of Star Trek Enterprise. This item is part of the circuitry aboard the Romulan Telepresence controlled Drone ship and consists of a black, roughly hexagonal frame that has three identical panels that all feature two predominant parts; the first part is a piece of smoked acrylic with a graphical application of Romulan iconographic symbols adhered to the reverse in the LCARS-style, and the second is a rectangular shape that bulges in the middle with similar Romulan symbols painted onto multi-colored symbols and clear, acrylic nodule accents. Screws on the panels grant access to what is beneath them; in the case of the LCARS-style panels, it grants access to the wiring involved with lighting them. The hexagonal frame was only seen on camera from one side so what would be the other three sides is merely a round, wooden panel. The top has a circular hole in the middle where additional circuitry is inserted, several holes for screws and two groups of three fasteners are found behind the circular hole. A standard, three prong, 110-volt plug powers the electronics and measures approx. 27 X 23 X 30 inches.

STAR TREK ELECTRONIC ALIEN DEVICE An electronic device made for used on Star Trek episodic television. Made of resin painted gray, the device has three opaque acrylic fans in the side, each gold colored detail. A button on the side activates multicolored flashing lights under the fan section as well as activating eight bright multicolored and sequentially flashing LED lights along the front. Measures approx. 6.25 x 3.75 x 1.75 inches.

STAR TREK VOYAGER SCRAMBLING DEVICE COMPONENT FROM THRESHOLD An electronic scrambling device component featured in the Star Trek Voyager episode, Threshold in which Captain Janeway and Tom Paris were transformed into Transwarp Humans. The device is made of brushed aluminum on a black acrylic base with black acrylic accents and gold colored metal detail. A small switch on the side activates four red flashing LED lights and a bar of scrolling green lights. The device is powered by a standard 9V battery that is accessed by unscrewing the base with an Allen wrench. Measures approx. 3 ¼ x 3 ¼ x 3 ¼ inches.

*STAR TREK ENT KANTARE ALIEN INTERFACE PANELS AND CARRY CASE FROM OASIS A set of acrylic computer interface panels and a carry case featured in the Star Trek Enterprise episode Oasis. The items are specific to the alien race in the episode known as the Kantares. The carry case is a weighty black item with a side panel that extends away from the item to reveal a pair of colored switch buttons and a series of graphical applications. A bank of lights is present on the exterior of the item which is not powered currently, but a battery cover is visible inside. The panels are curved and made to fit into console cutouts, the graphics on the reverse are visible when backlit. The items display the multi-colored iconographic lettering of the Kantares and there are three altogether. Two of the panels measure approx. 22.25 X 9 inches, the smaller is 14 X 7 inches. The carry case measures approx,. 10 X 14 X 4.25 inches.

STAR TREK STARSHIP DEBRIS A lot of four mid-sized model components distressed to appear as exploded starship debris features variously in Star Trek episodic television. The items appear to be a Starfleet warp nacelle, the connection section of a Galaxy-Class ship between the primary and secondary hulls, a support strut for a warp nacelle, and what appears to be part of a Klingon or Romulan ship hull based on its green paint. The items feature placements or sections of rods used to mounting against blue or green screen, and multiple loose, or barely hanging on elements made to appear torn from other pieces. The items vary in measurement approximating 13 X 14 X 7 inches, 24 X 24 X 2.5 inches, 13 X 14 X 8 inches, and 17 X 4.75 inches.

STAR TREK DS9 RUNABOUT MODEL WRECKAGE A selection of Runabout model components distressed to appear destroyed. During the course of Star Trek Deep Space Nine many runabouts were destroyed. These model components were used to depict the wreckage of those ships after they were destroyed by any number of circumstances. The selection contains the remnants of five warp nacelles, two of which appear to be the remains of the USS Ganges, destroyed by a T Lani cruiser in the episode Armageddon Game as the registry number NCC-72454 is still evident on both. All of the components feature the familiar Starfleet paint color scheme and a high degree of warping due to melting, scorch marks, holes with added exposed lattice and wiring. Several of the pieces appear to house mini-lights for special effects that are connected to a variety of wires with exposed ends. These untested items might in fact still light up if one were so inclined to determine the voltage necessary for illuminating them. One piece appear to be a large section of main body hull, another a mission module, and another still part of the aft quarters torn away.

STAR TREK VOYAGER ALIEN HEAD MASK LATENT IMAGE This impressive alien head mask was made for the Star Trek Voyager episode Latent Image in which the alien launched an unprovoked attack on a U.S.S. Voyager shuttle. The mask is made of latex painted in shades of brown and gold to simulate skin detail. There are four resin tusks around the mouth while the other tusks and spikes are made of latex. There are splits up each side of the face to allow the actor's head to fit into the mask.

STAR TREK: ENTERPRISE XINDI-REPTILIAN FACE APPLICATION The Xindi-reptilians are an aggressive humanoid race of the Xindi species. Featured for the first time in the Star Trek Enterprise series, the Xindi-reptilians were keenly focused on destroying planet Earth, going so far as to try and create a Xindi bioweapon to completely annihilate humanity. Their facial structure is distinctly reptilian with scaly ridges and prominent brows. Small tusks protrude from around the mouth and black spikes protrude from their heads. This delicate latex prosthetic was used to create the Xindi-reptilian appearance and is airbrushed extensively to create skin texture, shadows and definition. The tusks and spikes are made of resin.

*STAR TREK TNG ASSASSIN'S BLADE FROM SINS OF THE FATHER A prop weapon featured in the Star Trek The Next Generation episode Sins of the Father wherein Lieutenant Worf travels to the Klingon home world with his brother to answer for charges against his late father. This weapon was used by an unnamed Klingon warrior in an attempt upon Captain Picard's life and has a long brown handle featuring a textured, wrinkled design, gold colored accents, two tiny little spikes radiating out at opposite angles from the base of the blade, and a thin, retractable, metal blade. The item measures approx. 12.5 X 2.5 X 1 inches.

STAR TREK ENTERPRISE KLINGON KNIFE IN HOLDER This Klingon knife prop was used in the Star Trek Enterprise series. It was made to be used as a non descript background prop and therefore the knife and holder are made as one piece entirely of foam. The knife and holder are painted black with brown accents. On the side are two brass metal butterfly clips for attaching the knife to belt holes. Measures approx. 13.5 x 3 x 1 inches. This knife was probably used in STar Trek 5 by Captain Klaa.

1234567